Home Menu Search

Building Trust in Automated Speed Enforcement Systems

16 September 2020

The International Road Federation (IRF Global)has released a new White Paper which sets out the high-level principles required to achieve accuracy and integrity of Automated Speed Enforcement (ASE) systems .

ASE systems produce a record of the speed of a motor vehicle when the driver has exceeded the maximum posted speed limit. For an ASE system to be effective and widely accepted, including in a court of law, it is of paramount importance that all readings from speed enforcement devices are accurate, and that this accuracy can be proven by the operator. If an ASE system is improperly installed or maintained in a way that does not comply with the specified requirements, the accuracy of the readings may diverge sufficiently from the installation parameters to create a 'reasonable doubt'.

Once type approval is gained by the manufacturer in the relevant jurisdiction, it is up to the operator of the ASE to procure verification services though a laboratory that is certified to provide traceable calibrations. An independent calibration test conducted by an ISO 17025 accredited laboratory, that can produce traceable and accurate data in a full on-site system test from the road to the violation record, will provide the strongest assurance and is much less susceptible to legal or technical challenges.

Conversely, if an ASE system is found to be inaccurate during or after a period of uncalibrated enforcement operation, the safety benefit and credibility of the ASE treatment as a whole is at risk. A reduction in the trust in the accuracy of the ASE systems will result in a loss of public support and confidence in the enforcement authority, and could also result in reparations that include the repayment of fines and penalties incorrectly issued as a result of the defect. Finally, the removal of an improperly calibrated speed enforcement system will create a period of increased risk to the public.

The full White Paper may be downloaded at https: //www.irf.global/white-papers/

 

Related news, events and information

Road Safety Support’s speed testing facility now an official laboratory

4 December 2018 – Press release from Road Safety Support . Road Safety Support's facility for testing the accuracy of speed...

Ford's Intelligent Speed Limiter: peace of mind when driving safely

27 April 2017 – Story from Newspress. New legislation has been introduced that will dramatically change the way speeding fines...

Speed and Safety Cameras

25 August 2010 – RoSPA has also issued a valuable evidence-based defence of speed cameras entitled: 'Ten Reasons to Maintain...

Volvo and Uber to equip base-standard XC90 with self-driving capabilities

17 June 2019 – Story from Autonomous Vehicle International. Volvo Cars has combined the base model of an XC90 SUV with a...

CIHT recognises road safety scheme

24 June 2015 – Story from Road Safety GB An initiative to improve driver behaviour on the A9 trunk road, a 246-mile route...

ITAI Crash Test and Research Day

8 August 2019 – Story from the Transport Research Laboratory. The Institute of Traffic Accident Investigators crash test days...

The Safe System

22 July 2015 – Adopting the Safe System In order to produce positive road safety outcomes, strong management in all aspects...

Driver Acceptance of New Technology

2 February 2014 – Acceptance of new technology and systems by drivers is an important area of concern to governments, automotive...

PLUS Malaysia Berhad (PLUS)

3 December 2019 – PLUS Malaysia Berhad (PLUS) is Malaysia's largest highway operator, serving over 1.7 million users daily...